WheelsJoint

Home » Troubleshooting » Dodge Journey battery light is on – causes and how to reset

Dodge Journey battery light is on – causes and how to reset

When the red battery light comes on in the dashboard of Dodge Journey, it indicates a malfunction in the charging system. This can happen due to a number of reasons which we will discuss in this article.

Dodge Journey

The most common reason for battery light illuminating in Dodge Journey is faulty alternator. But the battery light can also come on due to a damaged wire, corrosion on electrical connectors, corrosion on battery terminals, bad ground connection and slipping serpentine belt.

1. Faulty Alternator

2015 dodge journey battery light came on

Alternators can fail at any time, but generally they last over 100,000 miles. Before replacing the alternator, you must rule out other causes that may stop or degrade flow of current from the alternator, for example: bad electrical connection or damaged wire.

How to test the alternator

The easiest method to check the alternator is by measuring the voltage at the battery terminals when the engine is running.

  • Start your Journey.
  • Connect the black cable of the multimeter to negative terminal of the battery, and the red cable to the positive terminal.
  • The voltage should be between 13.5 and 14.8 volts with the engine running.
  • Switch on the accessories in your Journey, for example, headlights, AC fan at full speed, and interior lights.
  • The voltage should remain around 14 volts. If it drops and remain below 13.5 volts, it indicates a problem with the current supply from the alternator.
  • If the voltage drops below 12 volts with the engine running and the accessories turned on, it means the current supply from the alternator is completely cut off and all the electronics are solely powered by the battery.

2015 dodge journey battery light came on

Can you drive Journey with a bad alternator?

Yes, you can drive your Journey with a bad alternator, but only for a short distance. The battery charge will go down as you drive since all the on-board electronic controllers and accessories are now solely powered by the battery. When the battery charge gets too low the engine will shut down, and you will be stranded.

Recommended video

2. Poor ground connection

What is a ground connection.

The negative terminal of the battery is connected to the body/chassis of Journey, called a ground connection. The engine also requires a ground connection to function, but the way the engine is mounted, it does not allow the electric current to flow between the engine and the body (due to non-conductive rubber insulated engine mounts). For this purpose, a ground strap/wire is used to connect the engine and the chassis.

2015 dodge journey battery light came on

What happens when the ground connection goes bad?

If the ground connection of the chassis or the engine goes bad in your Journey due to rust or corrosion, you will face all sorts of electrical issues, including battery light illuminating in the dashboard. The alternator relies on the ground connection of the engine to function properly. When the ground is bad, the current supply from the alternator will be reduced or may fluctuate. Additionally, in rare cases the contact between the engine block and the alternator can also go bad due to corrosion.

How to check if the ground connection is good?

You can check the quality of the ground connection in Journey by doing a conductivity test between the negative terminal of the battery and the engine. Take a multimeter, change its settings to ohms symbol. Touch one probe to the negative terminal of the battery, and the other probe to any exposed metal part of the engine. The reading should be at or very close to zero ohms. Do the same between the negative terminal of the battery and exposed metal part of the alternator.

Inspect and clean the ground connections

If the conductivity test fails, check the condition of the ground connections in your Journey. Inspect the connectors of the ground cables (battery to body, body to engine) for any signs of rust or corrosion. Clean the contacts with a sandpaper or wire brush. You may also have to remove the alternator and clean the ground contact area on the alternator and on the engine block.

3. Poor battery connection

It is possible the alternator in your Dodge Journey is working properly, but the current flow is interrupted due to a loose electrical connection, a damaged wire, or corrosion on the battery terminals.

Corrosion on battery terminals

Battery corrosion is a fairy common problem (except in AGM batteries), especially if the installed battery is more than 2 years old. Corrosion occurs when the battery acid reacts with the metal terminals which can lead to loss of contact and reduced current flow. If there isn’t enough current flow, the battery will not be charged properly, and may cause engine starting problems.

Check battery terminals

To know if your Journey charging system problems are from dirty battery terminals, you need to investigate them. Lift the plastic covers over the terminals and check for any signs of corrosion. If you discover white deposits or silvery-green deposits, but no further cracks or damage, you may not have to replace the battery or the alternator, just clean the battery terminals.

2015 dodge journey battery light came on

Clean the battery terminals

Quick cleaning: There is a neat little trick with which you can clean corrosion on the battery terminals of your Journey in under a minute. Pour hot boiling water over the corroded terminals and the corrosion will just melt away. Do one terminal at a time and don’t let water puddle on the top of the battery touch both terminals at the same time, this can short the battery.

Thorough cleaning: To thoroughly clean the battery in your Dodge Journey, you have to remove the terminal cables first, which requires no special knowledge, just a little concentration, as the order is very important. First remove the black cable from the negative terminal using a wrench or a plier. Next you can unplug the red positive terminal cable. Be careful not to touch both terminals with your metal tool, it will be one expensive mistake. Once the battery has been removed from the circuit, you can start cleaning the corroded battery with sandpaper or wire brush. After cleaning, reconnect the cables in reverse order, positive first, then negative.

4. Slipping serpentine belt

The serpentine belt, also known as accessory belt or drive belt, transfers the power from the engine to other components like the alternator and the AC compressor, that are essential for normal operation of your Dodge Journey.

If the serpentine belt is damaged or becomes loose, or if the alternator pulley develops a defect, it can cause the belt to slip. This can cause the alternator to spin slower or inconsistently and the electricity production is degraded. When the on-board diagnostic system detects low voltage from the alternator, the battery symbol light comes on in the instrument cluster of Journey.

Symptoms of bad serpentine belt

The most common sign of bad serpentine belt in Journey is squealing noise from the engine compartment. Another prominent sign is visible cracks on the ribbed part of the belt. A slipping accessory belt can also cause burning smell.

2015 dodge journey battery light came on

Sound of a slipping serpentine belt

If the serpentine belt is found to be defective, it must be replaced. Keep in mind that a slipping belt is not always defective, it can slip due to a number of reasons, including due to a bad tensioner pulley or any other pulley.

5. Rodent damage

If rodents like rats, mice, or squirrels have chewed up the cables for the alternator, it can cause the battery light to turn on in Journey. Look for any signs of bite marks in the engine compartment, and examine all the cables for the alternator. If any cable has been damaged, replace it with a new one.

2015 dodge journey battery light came on

How to reset the battery light

Fix the issue.

Resetting the battery light in Journey without solving the underlying issue may not help, as the warning light will turn back on when the system again detects the fault. The light should disappear automatically after fixing the issue. If it doesn’t turn off immediately, driving your vehicle for a few miles should help.

OBDII scanner method

The proper way to reset the battery light in Journey is by clearing the codes with an OBDII scanner. If the warning light doesn’t turn off automatically after fixing the issue, you will have to do it manually by connecting a diagnostic device and then deleting all the error codes related to the charging system.

2015 dodge journey battery light came on

Disconnect the battery

If you don’t have a diagnostic device, it may be possible to reset the battery light in Journey by disconnecting the battery for a few minutes. Remove the cable from the negative terminal of the battery first, then from the positive terminal. With the battery disconnected, press the horn button a few times and turn on the headlights to drain out all the residual electricity from the system. After about 15 minutes, reconnect the battery in reverse order: positive cable first, then negative cable.

Use OBD2 scanner for diagnosis

Since Dodge Journey is equipped with on-board diagnostics (OBD), a fault diagnosis can provide initial indications of where the malfunction is located.

2015 dodge journey battery light came on

To begin troubleshooting, you must first connect the diagnostic tool to your Journey. The OBDII connector is usually located under the dashboard. With the tool connected, turn on the ignition. Most diagnostic devices then ask for some information about the vehicle. It is important that you enter this 100% correctly, otherwise the result of the search may be inaccurate. In addition to the vehicle make, model, and engine type, you usually also have to type in the Vehicle Identification Number (VIN). Since some OBD codes are manufacturer-specific, the scanner will be able to give you more accurate information if you enter more details about your Journey.

When the battery light comes on in your Dodge Journey, you should always start with testing the voltage at the battery when the engine is running. If the voltage test fails, then move on to testing the alternator and its electrical connections.

In any case, it is advisable for laypersons to visit a workshop. A professional mechanic can swiftly diagnose the charging system issue for you.

dodge-journey-pd

  • Kia Sedona auto windows not working, how to reset
  • Jaguar E-PACE low oil pressure light is on – causes and how to reset
  • Ford S-Max steering wheel vibration causes and diagnosis
  • Mitsubishi Delica bad alternator symptoms, how to check voltage
  • Chrysler Sebring makes sloshing water sound – causes and how to fix it
  • Cadillac DeVille dashboard lights flicker and won’t start – causes and how to fix it
  • Buick Terraza auto windows not working, how to reset
  • Infiniti QX80 AC smells bad – causes and diagnosis
  • BMW X6 low oil pressure light is on – causes and how to reset
  • SEAT Toledo Apple CarPlay not working – causes and how to fix it
  • Toyota 86 key fob won’t lock or unlock the doors
  • Jaguar XF makes sloshing water sound – causes and how to fix it
  • Chevy TrailBlazer makes grinding noise when starting – common causes
  • Adjusting Blind Spot Alert settings in Jeep Grand Cherokee
  • Android Auto on Audi SQ2, how to connect
  • Maserati Levante Android Auto not working – causes and how to fix it
  • Android Auto not working – causes and how to fix it
  • Toyota Verso bad spark plugs symptoms, causes, and diagnosis
  • Fiat Panda uneven tire wear causes
  • Jaguar E-PACE dead battery symptoms, causes, and how to jump start

Best Electric Vehicles

Dodge Journey battery light is on – causes and how to reset

Dodge Journey

When the red battery light illuminates on the dashboard of a Dodge Journey, it indicates a malfunction in the charging system. In this article, we will explore the various reasons that can lead to this issue.

Table of Contents

Faulty Alternator of Dodge Journey

The most frequent cause of the battery light coming on in a Dodge Journey is a faulty alternator. The alternator plays a crucial role in converting mechanical energy from the engine into electricity, which not only powers all the onboard accessories but also charges the battery. If the alternator develops a fault and ceases to generate electricity, the entire electrical load of the vehicle shifts to the battery.

Consequently, the battery quickly drains as it no longer receives a charge from the alternator. Typically, alternators last for over 100,000 miles, but they can fail unexpectedly. Before considering alternator replacement, it is important to eliminate other potential causes that might impede or disrupt the current flow from the alternator, such as a bad electrical connection or damaged wire.

In addition to a faulty alternator, there are several other factors that can trigger the battery light to come on. These include a damaged wire, corrosion on electrical connectors, corrosion on battery terminals, a bad ground connection, or a slipping serpentine belt. It’s essential to consider these possibilities as well when diagnosing the red battery light issue in a Dodge Journey.

How to test the alternator

Here’s a revised version of the instructions on how to test the alternator:

To test the alternator, you can follow these simple steps and measure the voltage at the battery terminals while the engine is running:

  • Start your Dodge Journey.
  • Connect the black cable of a multimeter to the negative terminal of the battery, and the red cable to the positive terminal.
  • With the engine running, observe the voltage reading on the multimeter.
  • The voltage should fall within the range of 13.5 to 14.8 volts.
  • Next, switch on various accessories in your Journey, such as headlights, the AC fan at full speed, and interior lights.
  • The voltage reading should remain around 14 volts even with the accessories on. If it drops and consistently stays below 13.5 volts, it indicates a problem with the current supply from the alternator.
  • If the voltage drops below 12 volts while the engine is running and the accessories are turned on, it suggests that the current supply from the alternator has been completely cut off, and all the electronics are solely powered by the battery.

By following these steps and observing the voltage readings, you can get a better idea of the performance and functionality of the alternator in your Dodge Journey.

Revised Version

While it is possible to drive your Dodge Journey with a faulty alternator, it is important to note that you can only do so for a limited distance. When the alternator is not functioning correctly, the battery becomes the sole source of power for all the onboard electronic controllers and accessories.

As you drive, the battery charge will gradually deplete. Eventually, when the battery charge reaches a critically low level, the engine will shut down, and you will find yourself stranded. Therefore, it is crucial to exercise caution and avoid driving a Journey with a bad alternator for an extended period, as it may lead to unexpected breakdowns or an inability to restart the vehicle. It is recommended to address the alternator issue promptly to avoid any inconvenience or potential safety risks.

Understanding Ground Connections

In a Dodge Journey, a ground connection refers to the connection between the negative terminal of the battery and the body/chassis of the vehicle. The engine also requires a ground connection to operate properly.

However, due to the non-conductive rubber-insulated engine mounts, the engine’s mounting system prevents the flow of electric current between the engine and the body. To establish an effective ground connection, a ground strap or wire is utilized to connect the engine and the chassis.

What happens when the ground connection goes bad?

When the ground connection of the chassis or engine in your Dodge Journey becomes compromised due to rust or corrosion, it can lead to various electrical problems, including the illumination of the battery light on the dashboard.

The proper functioning of the alternator relies on a solid ground connection from the engine. When the ground connection is faulty, it can result in a reduced or fluctuating current supply from the alternator. In rare instances, corrosion can also affect the contact between the engine block and the alternator, causing further issues.

How to Verify the Quality of the Ground Connection:

To ensure the integrity of the ground connection in your Dodge Journey, follow these steps to conduct a conductivity test:

  • Prepare a multimeter and set it to the ohms (Ω) symbol.
  • Take one probe of the multimeter and touch it to the negative terminal of the battery.
  • Take the other probe and touch it to any exposed metal part of the engine.
  • The multimeter should display a reading close to zero ohms, indicating a good ground connection. Repeat the same test between the negative terminal of the battery and an exposed metal part of the alternator.

Inspecting and Cleaning the Ground Connections:

If the conductivity test yields an unfavorable result, it’s essential to inspect the condition of the ground connections in your Dodge Journey. Follow these steps:

  • Inspect the connectors of the ground cables, such as the battery-to-body and body-to-engine connections, for any signs of rust or corrosion.
  • Use sandpaper or a wire brush to clean the contacts thoroughly.
  • In some cases, you may need to remove the alternator to access and clean the ground contact areas on both the alternator and the engine block.

By performing these tests and inspections, and cleaning the ground connections if necessary, you can ensure a reliable ground connection in your Dodge Journey, helping to resolve any electrical issues and maintain proper functionality.

Inadequate Battery Connection:

In some cases, the alternator in your Dodge Journey may be functioning properly, but the flow of current is disrupted due to a loose electrical connection, damaged wire, or corrosion on the battery terminals.

Corrosion on Battery Terminals:

Battery corrosion is a relatively common issue, particularly in batteries that are over two years old (excluding AGM batteries). Corrosion occurs when battery acid reacts with the metal terminals, resulting in a loss of contact and reduced current flow. Inadequate current flow can prevent proper battery charging and may lead to engine starting problems.

Checking Battery Terminals:

To determine if your charging system issues in the Journey are caused by dirty battery terminals, you need to inspect them. Lift the plastic covers over the terminals and look for any signs of corrosion.

If you notice white or silvery-green deposits without any further cracks or damage, you may not need to replace the battery or the alternator; simply cleaning the battery terminals may suffice.

Cleaning the Battery Terminals:

There are two methods you can use to clean the battery terminals in your Dodge Journey:

Quick Cleaning: A simple trick for swiftly cleaning corrosion on the battery terminals is to pour hot boiling water over them. The heat will cause the corrosion to melt away. Clean one terminal at a time and ensure that water does not puddle on the top of the battery or touch both terminals simultaneously to avoid shorting the battery.

Thorough Cleaning: For a more thorough cleaning, follow these steps:

  • Disconnect the terminal cables from the battery. Start by removing the black cable from the negative terminal using a wrench or pliers. Then, disconnect the red positive terminal cable. Take care not to let your metal tool touch both terminals simultaneously, as this can result in damage.
  • Once the battery is disconnected, you can begin cleaning the corroded areas using sandpaper or a wire brush.
  • After cleaning, reconnect the cables in reverse order—positive first, then negative—ensuring they are securely attached.

By checking and cleaning the battery terminals in your Dodge Journey, you can address any issues caused by poor battery connections and help maintain a proper flow of current within the charging system.

Slipping Serpentine Belt

The serpentine belt, also known as the accessory belt or drive belt, plays a crucial role in transferring power from the engine to various components, including the alternator and AC compressor, which are essential for the normal operation of your Dodge Journey.

If the serpentine belt becomes damaged, loose, or if there is a defect in the alternator pulley, it can result in belt slippage. This, in turn, can cause the alternator to spin at a slower or inconsistent speed, leading to a degradation in electricity production. When the onboard diagnostic system detects low voltage from the alternator, the battery symbol light will illuminate in the Journey’s instrument cluster.

Symptoms of a Bad Serpentine Belt

The most common indication of a faulty serpentine belt in a Journey is a squealing noise originating from the engine compartment. Visible cracks on the ribbed part of the belt are another prominent sign to watch for. Additionally, a slipping accessory belt can emit a burning smell.

If the serpentine belt is found to be defective, it must be replaced. However, it’s important to note that a slipping belt is not always indicative of a defective belt itself. Belt slippage can occur due to various factors, such as a faulty tensioner pulley or any other pulley in the system. Therefore, a thorough inspection is necessary to identify the root cause of the belt slippage.

Rodent Damage

If rodents such as rats, mice, or squirrels have chewed through the cables for the alternator in your Dodge Journey, it can trigger the illumination of the battery light. Inspect the engine compartment for any signs of bite marks, and carefully examine all the cables connected to the alternator. If any cable is found to be damaged, it should be replaced with a new one to restore proper functionality.

Read More: How to remote start Chevy Colorado with key fob or mobile device

Resetting the Battery Light

It’s important to note that simply resetting the battery light without addressing the underlying issue may not provide a lasting solution, as the warning light will likely reappear once the system detects the fault again. Typically, the battery light should automatically turn off after fixing the underlying problem. If it does not immediately go off, driving your vehicle for a few miles may help.

Read More: Enhancements for Future Models: The Evolution of 2025 Lexus GX

OBDII Scanner Method

The recommended method to reset the battery light in your Dodge Journey is by using an OBDII scanner to clear the relevant error codes. If the warning light remains illuminated even after resolving the issue, you will need to manually reset it by connecting a diagnostic device and deleting all the error codes associated with the charging system.

It’s advisable to seek professional assistance or consult the vehicle’s manual for specific instructions on how to reset the battery light using an OBDII scanner or diagnostic device.

Read More: Jeep Compass makes clicking noise and won’t start – causes and how to fix it

Disconnecting the Battery

If you don’t have access to a diagnostic device, there is a method you can try to reset the battery light in your Dodge Journey by disconnecting the battery for a few minutes. Follow these steps:

  • Begin by removing the cable from the negative terminal of the battery first, ensuring that it is safely disconnected.
  • Next, remove the cable from the positive terminal of the battery.
  • With the battery disconnected, press the horn button a few times and turn on the headlights. This will help drain any residual electricity from the system.
  • Allow the battery to remain disconnected for approximately 15 minutes.
  • After the elapsed time, reconnect the battery in reverse order: attach the positive cable first, followed by the negative cable.

By following these steps, you may be able to reset the battery light in your Journey. However, please note that this method does not address the underlying issue that triggered the warning light. If the light reappears after resetting, it is recommended to have the vehicle inspected by a professional to identify and resolve the root cause of the problem.

Read More: Top 10 Reasons You Should Buy Electric Car [Updated 2023]

Using an OBD2 Scanner for Diagnosis

To initiate the troubleshooting process and gain initial indications of the location of the malfunction in your Dodge Journey, utilizing an OBD2 scanner is recommended.

  • Begin by connecting the OBD2 diagnostic tool to your Journey. Typically, the OBD2 connector can be found beneath the dashboard.
  • Once the tool is connected, turn on the ignition. Most diagnostic devices will prompt you for specific vehicle information. It is crucial to enter this information accurately to ensure precise results. Along with the make, model, and engine type, you may also need to input the Vehicle Identification Number (VIN). Providing more detailed information about your Journey will enable the scanner to provide more accurate diagnostic information, especially since certain OBD codes can be manufacturer-specific.

Read More: Electric Cars Infrastructure Problem: All you need to know

When the battery light illuminates in your Dodge Journey, it is recommended to start by testing the voltage at the battery while the engine is running. If the voltage test indicates a problem, you should proceed to test the alternator and its electrical connections.

In any case, if you are not experienced with automotive repairs, it is advisable to visit a professional workshop. A skilled mechanic can efficiently diagnose the charging system issue and provide the necessary repairs or guidance.

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

Dodge Journey Forum

  • Remember me Not recommended on shared computers

Forgot your password?

  • Alarms, Keyless Entry, Key Fobs, Locks & Remote Start

Battery saving mode

By Chris1276 May 5, 2014 in Alarms, Keyless Entry, Key Fobs, Locks & Remote Start

  • Reply to this topic
  • Start new topic

Recommended Posts

Battery icon pops up on my evic. When i went to message in evic it says "battery saving mode"

What does it mean. Does it associate with my battery being dead last month? Is it an indication of weak battery! I called dealership about it and they schedule me for next two weeks! I just wanna know if forum member gave experience like this also!

Link to comment

Share on other sites.

Journeyman425

Journeyman425

Hmmm...Learn something new every day:

Chrysler Group LLC Version 1

Case Number: S1108000147

Release Date: 09/17/2011

Symptom/Vehicle Issue:

Battery Saver Message Appears In The Evic

Discussion:

Battery saver message is being displayed in the EVIC of the cluster.

Vehicles with EVIC warning display can display a battery saver message. The sensor on the battery reports battery (voltage, temperature, state of charge and amp-hours in/out etc.) to the CBC (Body Controller) on the LIN bus. The CBC sends a message to the cluster to indicate ‘battery saver active’ it indicates that the battery has lost >5 AH during an ignition cycle and may cause other component operation issues reducing component performance, blower speed, radio volume, window operation ect…as battery charge declines.

  • OhareFred , rolly , 2late4u and 1 other

Like

Thanks for sharing.. Im just confuse about it. Since i have schedule to dealership next next week should i ask them to replace with the new battery? Will it resolve the issue. I have dead battery issue twice on my 20 months of owning my journey. Several occasion my remote start wont work but when i use the manual push button, it works! My audio is compleate dead now( radio, usb music and even navigation) i dont know if its associated with my battery saving mode.

bigtsr

Be pro-active and print Journeyman245s post out

and bring the hardcopy to your dealer when you go for service.

There are a lot great people in service but unfortunately

there are many who need a push in the right direction.

  • rolly , OhareFred and Journey_SeXT
  • 2 weeks later...

Lol I broke me battery sensor off when I changed to my Optima battery back in December! It did the same as yours, but went away, they wanted $100 for it! I asked what it did and if it was important, nobody knew! No problems without it!

[email protected]

  • 1 year later...

eminrzayev@gmail.com

I've the same problem with Battery Safe Mode on my Journey RT 2012

So what was the problem Chris?

Battery or Alternator?

jkeaton

Hi all, I've the same problem with Battery Safe Mode on my Journey RT 2012 So what was the problem Chris? Battery or Alternator?
You need to get them both tested to find out.

Yes (( Ok, I think I will. thank you

. Advance Auto and other similar stores will test your alternator and battery for free .

Not in Azerbaijan )) But thank you for advise ))

  • dhh3 and 11journeybama

By the way the message appeared after I turned on the driver seat's heating

:)

Sorry for offtop

wpginterceptor

ALTERNATOR !

car will go into BATTERY SAVE MODE, where even the radio wont work as its trying to save power!

Eventually car will die as it takes power to keep it running..  get the alt changed right away!

I did mine in about 30 mins, some good youtube vids on it

  • 2 years later...

Just had a battery and alternator put in my 2013 Dodge Journey but Battery saving mode light is on ... any idea what this could be?

3 hours ago, Bry said: Just had a battery and alternator put in my 2013 Dodge Journey but Battery saving mode light is on ... any idea what this could be?  

Take it back to whoever installed it. 

  • yyz and larryl

Like

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account. Note: Your post will require moderator approval before it will be visible.

Guest

×   Pasted as rich text.    Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.    Display as a link instead

×   Your previous content has been restored.    Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Insert image from URL
  • Submit Reply
  • Existing user? Sign In

More Forum Apps

  • Online Users
  • Leaderboard

|| Forum Activity ||

  • All Activity
  • Create New...

Drivetrain Resource

Dodge Journey Check Engine Light On: Why and What to Do

The check engine is the most common warning light that appears in the Dodge Journey’s instrument cluster.  Well over half of this site’s content is related to solving the various reasons why the check engine light comes on.

Dodge Journey Check Engine Light

The good news is that the check engine light indicates that there are Diagnostic Trouble Codes (DTCs) stored in your Journey’s computer , which is a very good thing.  DTC’s really help save time determining what is wrong with your vehicle.

Dodge Journey Check Engine Light On

The check engine light is often referred to as the Malfunction Indicator Lamp (MIL) or Service Engine Soon light.  All three terms are 100% interchangeable.

Table of Contents

  • What Are Trouble Codes ?
  • How to Pull Trouble Codes

How to Reset the Check Engine Light

Common questions, what are trouble codes.

Pulling Trouble Codes

Trouble codes are a number sequence of letters and numbers that correspond with a standardized list of problems that can occur in any vehicle, including the Dodge Journey . Some of them are Dodge specific, while most have the same meaning no matter who made the vehicle.

Common OBD II Codes 

The most common of all trouble codes is P0420 (it indicates your Dodge Journey’s catalytic converter isn’t scrubbing pollutants efficiently).

Here are some of the other most common codes:  

  • P0442 – Small EVAP leak (most commonly fixed by tightening a loose gas cap or replacing it)
  • P0300 – Random misfire (bad ignition coil(s), spark plugs, or spark plug wires).
  • P0128 – Engine running too cool (almost always caused by a thermostat that’s stuck open)
  • P0172 – Air Fuel mixture too rich (there are many causes, including oxygen sensors, leaking injectors, or too much fuel pressure)

The most common codes are related to the emissions system .  Some of them are as easy to fix as replacing your Journey’s.  Others require serious diagnostic tests from a repair shop.

How to Pull Trouble Codes on the Dodge Journey

How to pull trouble codes from the dodge journey

You can either pull the trouble codes from your Journey’s PCM (Powertrain Control Module) yourself, or you can bring your vehicle to a parts store or shop to have it scanned.

Pull Them Yourself  

You can put a scan tool into the OBD II port and pull codes out of the diagnostic system yourself.  Any vehicle made for the 1996 model year and up uses the same protocol.

You can usually find the OBD II port underneath the Journey’s steering wheel. The exact location of the port is going to depend on what model year you have. If you don’t see it check the owner’s manual or do a quick google image search.

Once your scanner is online, you can pull the codes. You should see a retrieve codes option.

Take Your Carortruck to a Shop or Parts Store

2015 dodge journey battery light came on

If you don’t have a scan tool, you can take your Journey to the local parts store.  Most of them are happy to pull the codes for you for free . 

A lot of auto shops also offer free scan service, but you may find pressured into authorizing whatever repairs they suggest on the spot.

Once you have the codes in hand, you can look them up and determine what’s wrong with your Journey.

There are three ways to reset the Dodge Journey’s check engine light.  We recommend trying to identify the problem and fixing it before resetting the check engine light.

1. Fix and Wait

The best way to clear the check engine light is to pull the trouble code, identify and fix the issue and then drive your Journey around until the module that threw the code recognizes that the problem is fixed. 

Sometimes it can take a few drive cycles for your vehicle’s check engine light to shut down.  Other times, it’ll happen as soon as you fire the vehicle up.  Some folks prefer to clear the code and see if it comes back on

2. Use an OBDII Scanner

You can use an OBDII scanner to turn off your Journey’s check engine light.  The catch is, that if you don’t fix the problem, the light will turn on again.

This is done by connecting a scan tool to your Journey’s PCM and choosing the “clear codes” option.

Once you’ve identified and fixed the issue, wait for three or four days of normal driving to see if the Check Engine Light turns back on.

If it does not come back on after this period, then you can assume that your Dodge Journey is fixed and the light won’t be turning back on.

3. Disconnect the Battery

If you’ve identified and fixed the issue that caused your Journey’s Check Engine Light to come on, resetting the light is as simple as disconnecting and reconnecting the battery. This can be done by unhooking both cables from the battery terminals (negative cable first) and waiting 30 seconds before reconnecting them.

Once the battery is reconnected, your Check Engine Light should be reset and should no longer be illuminated. If the light does come back on again after you reset it, then it means that the issue has not been properly fixed and needs further attention.

Will a Vehicle Fail Inspection With the Check Engine Light On

If you are looking to get your Dodge Journey through emissions and the check engine light is on, it is an automatic fail in almost every State in the Union.  It doesn’t matter why the check engine light is on, it only matters that a code is stored. 

Here’s a list of the emissions regulations of each State .

You can’t reset a check engine light to circumvent emissions requirements.  When you reconnect the battery, the OBD II system is going to need several drive cycles to qualify to take an emissions test, which will give it enough time to recognize the issue.

Can You Drive With the Check Engine Light On?

Whether you can drive your Journey with the check engine light on depends on the code(s) that triggered the check engine light.  

You certainly can’t drive the Dodge Journey with the check engine light flashing.   A flashing check engine light indicates that there is a serious problem with the engine.

Why is My Check Engine Light Flashing?

A flashing Check Engine Light typically indicates a serious issue with your Journey and should not be ignored.  It usually indicates a catastrophic misfire that can dump raw fuel into the exhaust system, which can damage the catalytic converter and cause backfiring.  Do not drive your vehicle with a flashing check engine light .

Jewish Calendar 2015 Elektrostal’, Moscow Oblast, Russia

  • Monthly calendar
  • Candle-lighting times only

Advertisement

Calendar settings.

Select your calendar app:

  • Outlook Web

Apple iOS & macOS

This subscription is a 4-year perpetual calendar feed with events for the current year (2024) plus 3 future years.

Step-by-step: iPhone / iPad or macOS

Use this download alternative if you prefer to manually import the calendar events and merge with your own calendar.

Outlook Windows PC Desktop

Internet Calendar Subscriptions are used by Windows PCs with Microsoft 365, Outlook 2021, Outlook 2019, and 2016.

Step-by-step: Outlook for Windows

Use this download alternative if you prefer to manually import the calendar events into Outlook and merge with your own calendar.

Google Calendar

Icalendar feed url.

The iCalendar (.ics) format is used by many calendar apps.

Outlook Web (Outlook.com)

Outlook.com calendars are used by Windows 10 & 11, Outlook Mac, and Microsoft email accounts such as Hotmail.com, MSN.com and Live.com

Comma Separated Values (CSV)

CSV is a legacy calendar file format for Outlook 97-2003. Select the file that matches your computer’s date format:

  • Download CSV - USA mm/dd/yyyy
  • Download CSV - Europe dd/mm/yyyy

Step-by-step: CSV for Outlook for Windows

Print PDF (formatted for 8.5"x11" paper)

Download PDF Calendar

Weekly Shabbat times email

Get candle-lighting times for Elektrostal’, Parashat ha-Shavua & Havdalah delivered to your inbox every Thursday.

Email Privacy Policy : We will never sell or give your email address to anyone. We will never use your email address to send you unsolicited offers.

Generating preview

This may take a few moments...

Top.Mail.Ru

Current time by city

For example, New York

Current time by country

For example, Japan

Time difference

For example, London

For example, Dubai

Coordinates

For example, Hong Kong

For example, Delhi

For example, Sydney

Geographic coordinates of Elektrostal, Moscow Oblast, Russia

City coordinates

Coordinates of Elektrostal in decimal degrees

Coordinates of elektrostal in degrees and decimal minutes, utm coordinates of elektrostal, geographic coordinate systems.

WGS 84 coordinate reference system is the latest revision of the World Geodetic System, which is used in mapping and navigation, including GPS satellite navigation system (the Global Positioning System).

Geographic coordinates (latitude and longitude) define a position on the Earth’s surface. Coordinates are angular units. The canonical form of latitude and longitude representation uses degrees (°), minutes (′), and seconds (″). GPS systems widely use coordinates in degrees and decimal minutes, or in decimal degrees.

Latitude varies from −90° to 90°. The latitude of the Equator is 0°; the latitude of the South Pole is −90°; the latitude of the North Pole is 90°. Positive latitude values correspond to the geographic locations north of the Equator (abbrev. N). Negative latitude values correspond to the geographic locations south of the Equator (abbrev. S).

Longitude is counted from the prime meridian ( IERS Reference Meridian for WGS 84) and varies from −180° to 180°. Positive longitude values correspond to the geographic locations east of the prime meridian (abbrev. E). Negative longitude values correspond to the geographic locations west of the prime meridian (abbrev. W).

UTM or Universal Transverse Mercator coordinate system divides the Earth’s surface into 60 longitudinal zones. The coordinates of a location within each zone are defined as a planar coordinate pair related to the intersection of the equator and the zone’s central meridian, and measured in meters.

Elevation above sea level is a measure of a geographic location’s height. We are using the global digital elevation model GTOPO30 .

Elektrostal , Moscow Oblast, Russia

IMAGES

  1. 2015 Dodge Journey

    2015 dodge journey battery light came on

  2. Dodge Journey battery light is on

    2015 dodge journey battery light came on

  3. Battery Location Dodge Journey

    2015 dodge journey battery light came on

  4. Dodge Journey Battery Replacement Guide & Location

    2015 dodge journey battery light came on

  5. Battery Location 2015 Dodge Journey

    2015 dodge journey battery light came on

  6. Où se trouve la batterie sur un Dodge Journey Comment la remplacer

    2015 dodge journey battery light came on

VIDEO

  1. Dodge Journey Battery location is so weird 😐

  2. 2015 Dodge journey won't start, check engine light on

  3. January 7, 2024

  4. 2010 Dodge journey battery replacement DIY

  5. 2012 Dodge Journey battery location

  6. 2015 Dodge Journey Acceleration Sound V6

COMMENTS

  1. Dodge Journey battery light is on

    Dodge Journey - (NHTSA / Public Domain) The most common reason for battery light illuminating in Dodge Journey is faulty alternator. But the battery light can also come on due to a damaged wire, corrosion on electrical connectors, corrosion on battery terminals, bad ground connection and slipping serpentine belt. 1. Faulty Alternator.

  2. Dodge Journey Battery Light: Why It's On and How to Fix

    Touch the positive side of the voltmeter to the positive battery wire. With the engine off, you should get a reading somewhere between 12.0 volts and 12.6 volts. Now that you have a baseline, it's time to turn the engine on. Leave the air conditioner off, as well as the headlights and any other accessories.

  3. Dodge Journey battery light is on

    Follow these steps: Begin by removing the cable from the negative terminal of the battery first, ensuring that it is safely disconnected. Next, remove the cable from the positive terminal of the battery. With the battery disconnected, press the horn button a few times and turn on the headlights.

  4. 2015 Dodge Journey

    DaveJM on April 15, 2019. Hello, the battery light will come on to indicate a charging system concern. Either the alternator is not charging properly (either or both voltage and amperage could be improper), or there could be a wiring concern. The wiring that plugs into the alternator itself is often suspect, check there for damage to terminals ...

  5. Dodge Journey Questions

    Asked by GuruT9NNP Jun 09, 2018 at 03:58 AM about the 2012 Dodge Journey. Question type: General. My battery light came on when I was driving my. car. I was 40 minutes away from home. Soon after. the light came on the radio turned off and wouldn't. power back on. A little bit later the abs light came.

  6. Dodge Journey Questions

    Battery light coming on. Asked by James Apr 18, 2016 at 06:24 AM about the 2013 Dodge Journey SXT FWD. Question type: Maintenance & Repair. Battery light keeps coming on in 2013 Dodge. Journey. I pulled both the battery and alternator. and has them tested and both passed multiple. times. Any ideas on why light would still be coming.

  7. ANSWERED: Battery light (Dodge Journey)

    9 Answers. 210. GuruT5F2N answered 5 years ago. This exact thing just happened to my 2014 Dodge Journey r/t. After changing the battery the battery light went out but the battery saver mode is still displaying. I see where others are saying its the alternator. I have not driving it since changing the battery.

  8. ANSWERED: Battery light coming on (Dodge Journey)

    Battery light coming on. Asked by James Apr 18, 2016 at 06:24 AM about the 2013 Dodge Journey SXT FWD. Question type: Maintenance & Repair. Battery light keeps coming on in 2013 Dodge. Journey. I pulled both the battery and alternator. and has them tested and both passed multiple. times. Any ideas on why light would still be coming.

  9. 2015 dodge journey battery light issue : r/AskMechanics

    2015 dodge journey battery light issue Question I have a 2015 dodge journey, the battery light comes on and has been doing so far over a year now, it's been to several mechanics and they can never find an issue and Insist the car is a good running vehicle because the battery light isn't on 24/7, I've had the battery replaced; as well as ...

  10. Dodge Journey Questions

    Pisseddodgeowner answered 4 years ago. My Dodge Journey recently went into "battery saving mode". Pulled over, all the lights on the dash we're going on and off, windshield wipers going (even though off). We trailered the car, got it home, replaced alternator the next day. Started it and it was making a knocking noise. No problem, rocker ...

  11. Battery saving mode

    Chrysler Group LLC Version 1. Case Number: S1108000147. Release Date: 09/17/2011. Symptom/Vehicle Issue: Battery Saver Message Appears In The Evic. Discussion: Battery saver message is being displayed in the EVIC of the cluster. Repair: Vehicles with EVIC warning display can display a battery saver message.

  12. 2015 Dodge Journey battery light help. : r/MechanicAdvice

    Hello I have a 2015 Dodge Journey. The car battery light came on and I had the battery tested by a mechanic car battery said fail changed it, car battery light came back on 3 days later. Was told it was definitely the alternator had it changed, day after driving was gonna go back to Arizona it clicked BACK on after driving 2 hours.

  13. How-to change the battery in a Dodge Journey 2009-2019

    This Video shows you how to change a battery on a 2009-2019 Dodge Journey! I also show you which battery to buy (part numbers) and which tools you will need ...

  14. Dodge Journey Check Engine Light On: Why and What to Do

    1. Fix and Wait. The best way to clear the check engine light is to pull the trouble code, identify and fix the issue and then drive your Journey around until the module that threw the code recognizes that the problem is fixed. Sometimes it can take a few drive cycles for your vehicle's check engine light to shut down.

  15. Dodge Journey Questions

    Asked by Marijane Sep 24, 2018 at 09:33 PM about the 2013 Dodge Journey. Question type: Maintenance & Repair. I have a Dodge Journey 2013. The battery light came on and then all the warning lights came on, my car then went into lag mode. Got it home safely before it completely died. We changed the battery and we changed the alternator.

  16. Moscow Oblast

    Moscow Oblast (Russian: Московская область, romanized: Moskovskaya oblast, IPA: [mɐˈskofskəjə ˈobləsʲtʲ], informally known as Подмосковье, Podmoskovye, IPA: [pədmɐˈskovʲjə]) is a federal subject of Russia (an oblast).With a population of 8,524,665 (2021 Census) living in an area of 44,300 square kilometers (17,100 sq mi), it is one of the most densely ...

  17. Jewish Calendar 2015 Elektrostal', Moscow Oblast, Russia

    Download 2015 only. Use this download alternative if you prefer to manually import the calendar events and merge with your own calendar. Outlook Windows PC Desktop Internet Calendar Subscriptions are used by Windows PCs with Microsoft 365, Outlook 2021, Outlook 2019, and 2016. ...

  18. Geographic coordinates of Elektrostal, Moscow Oblast, Russia

    Geographic coordinate systems. WGS 84 coordinate reference system is the latest revision of the World Geodetic System, which is used in mapping and navigation, including GPS satellite navigation system (the Global Positioning System).

  19. Custom Fireplace Contractors & Installers in Elektrostal'

    Search 151 Elektrostal' custom fireplace contractors & installers to find the best fireplace contractor for your project. See the top reviewed local fireplace services and installers in Elektrostal', Moscow Oblast, Russia on Houzz.